Muratec MFX-1330 Field Engineering Manual page 88

Memory Switch 40 - Scanner
Initial
Switch
Setting
7 0 Factory use only
6 0 Factory use only
5 0 Factory use only
4 0 Factory use only
3 0 Factory use only
2 1 Factory use only
1 0 Factory use only
0 1 Document TX length limit
0: 3.6 meters
1: 1 meter
Memory Switch 41 ∼ 59 --- Factory use only
Memory Switch 60 - Remote reception
Initial
Switch
Setting
7 0 Factory use only
6 1 CML relay off time after
dialing
0: 1 sec
1: 200 ms
5 0 DTMF tones heard through
handset
0: No
1: Yes
4 0 Factory use only
3 0 Factory use only
2 0 Factory use only
1 0 Factory use only
0 0 Factory use only
Adjust
Setting to unlimited will override document jam
sensing.
Adjust
When dialing from the keypad, phone line noise
may occur as the CML relay switches on and off.
Set this switch to "0" to avoid this.
Determines if DTMF tones are produced through
the handset in off-hook dialing.
3-60
Usage/Comments
Usage/Comments