Muratec MFX-1330 Field Engineering Manual page 151

2-1. The LCD now shows the Consumable order sheet setting menu and Service report setting menu.
Use or and display the desired menu.
Set Order Sheet
Reset Order Sheet
Print Order Sheet
Set RDS
Clear RDS
• To set the consumable order sheet, proceed to step 3-1.
• To clear the consumable order sheet setting, proceed to step 4-1.
• To print the consumable order sheet, proceed to step 5-1.
• To set the service report settings, skip to step 6-1.
• To clear the service report, skip to step 7-1.
• To return to the standby mode, press RESET.
Consumable order sheet settings
3-1. Select "Set Order Sheet" then press ENTER. the
Dealer Code ;Upper
Enter the dealer's code. The dealer's code can be up to 10 characters in length.
3-2. Press ENTER to save the dealer's code and continue. The LCD will show:
Dealer Name;Upper
Enter the dealer's name. The name may be up to 30 characters in length.
3-3. Press ENTER to save the distributor's name and continue. The LCD will show:
Dealer Tel No
Enter the dealer's phone number. The phone number may be up to 20 characters in length.
3-4. Press ENTER to save the dealer's phone number and continue. The LCD will show:
Dealer Fax No
Enter the dealer's fax number. The fax number can be up to 20 characters in length.
The consumable order sheet will be sent to this fax number when "Transmit" is selected in step 3-12 of
"Consumable order sheet setting".
3-5. Press ENTER to save the dealer's fax number and continue. The LCD will show:
CustAccount;Upper
Enter the customer's account. The customer's account may be up to 10 characters in length.
3-6. Press ENTER to save the customer's account and continue. The LCD will show:
Cust Name ;Upper
Enter the customer's name. The customer's name may be up to 30 characters in length.
/ /Enter
will show:
LCD
3-123