Multi Line Settings - Muratec MFX-1330 Field Engineering Manual

3.24 Multi Line Settings

This setting makes it possible to set the following menu for the optional second line:
•
Memory Switches
•
Unique Switches
•
ECM mode
•
Dialing Pause
•
Number of Rings
Note: To set the second line, it is necessary that the Unique Switch 96 bit 6 is set to "On (1)" in advance.
1. Press MENU, *, 2, 8.
Set Memory Switch
2. Press ENTER and make the desired settings for the second phone line. See "3.3 Memory Switch
Adjustment" from page 3-48 if necessary. You will see a " " mark on the list for switches available to set
respectively for the second phone line.
3. Press MENU twice and
Uniq Switch
4. Press ENTER and make the desired settings for the second phone line. See "3.7 Unique Switch
Adjustment3.3 Memory Switch Adjustment" from page 3-74, if necessary. You will see a " " mark on the
list for switches available to set respectively for the second phone line.
5. Press MENU twice and
ECM Mode
6. Press ENTER and make the desired settings for the second phone line.
7. Press ENTER.
Dialing Pause
8. Press ENTER and make the desired settings for the second phone line.
9. Press ENTER.
# of Rings
10. Press ENTER and make the desired settings for the second phone line.
11. Press ENTER to save the setting.
12. Press RESET to go back to the stand by mode.
/ /Enter
.
/ /Enter
.
/ /Enter
/ /Enter
/ /Enter
3-118