Configuration With Serverstart - PRIMERGY Econel 230R S1 Operating Manual

Starting up and operation
5.3.2

Configuration with ServerStart

With the ServerStart Disc 1 provided, you can configure the server and install the
operating system in a convenient manner. Menu-guided configuration includes
server configuration with the SCU and RAID controller configuration with
ServerViewRAID.
The ServerStart advantages
– Automatic configuration of your server's hardware and disk arrays.
– Installation assistance for all leading server operating systems.
– Creation of configuration files for unattended installation of several
PRIMERGY servers with identical hardware configurations.
– Installation of drivers and additional software.
I
The software that can be installed depends on your server's hardware
configuration. This configuration is detected automatically.
I
Descriptions of operating systems not covered in the RAID controller
manual are provided in the appropriate readme files on the driver CDs.
To find out how to operate ServerStart and for further information, refer to the
corresponding manual (see
If you are using ServerStart, you can skip the following section on how to
configure the server and install the operating system. Continue from the
"Cleaning the server" on page 62
Econel 230R S1
"Literature" on page
section.
Operating manual
Configuring the server
85).
61