B.4 Parameters In The Server Menu - PRIMERGY TX200 S3 Configuration Manual

Ｂ.４ Parameters in the Server menu
（ ） The initial values have been unchanged.
Item
O/S Boot Timeout:
Action:
Timeout Value:
ASR&R Boot Delay:
Power Cycle Delay:
Boot Retry Counter:
Hide Diagnostic IDE:
Diagnostic System:
Next Boot: *1
Device Instance: *2
Temperature Monitoring:
Memory Scrubbing:
> CPU Status
> Memory Status
> Console Redirection
*1: Appears when "IDE Drive", "Remote Image Disk", "LAN", "RSB USB" or "iRMC" is selected for
[Diagnostics System].
*2: Appears when "LAN" is selected for [Diagnostics System].
■CPU Status Submenu
（ ） The initial values have been unchanged.
Item
CPU Status
CPU 1 Status
CPU 2 Status
*1: Appears when CPU IERR occurs. This can be changed to "Enabled" only.
*2: A ppears when CPU is removed.
Initial value
Disabled ( )Enabled
Reset ( )Continue ( )Power Cycle
0 (
2 (
7 (
3 (
Disabled ( )Enabled
Disabled ( )IDE Drive ( )Disk Not Installed
( )Remote Image Disk ( )LAN
( )RSB USB ( )iRMC
Boot Option ( )Diagnostics System
0 (
Disabled ( )Enabled
Disabled ( )Enabled
Links to CPU Status submenu
Links to Memory Status submenu
Links to Console Redirection submenu
Initial value
Enabled ( )Failed*1 ( )Disabled *2
Enabled ( )Failed*1 ( )Disabled *2
13
B.4 Parameters in the Server menu
Setting
)[0〜100]
)[1〜30]
)[0〜15]
)[0〜7]
)[0〜15]
Setting