Table of Contents
Advertisement
Ｃ.５ Parameters in the Server Management Information
（ ） The initial values have been unchanged.
Item
Boot Options
Error Halt Settings
Last Power On Reason:
Last Power Off Reason:
Power Restore Policy
ASR&R Options
ASR & R Boot Delay
Action with retry counter zero
Retry counter
BIOS boot source for next boot
BIOS recovery flash bit
Power Cycle Delay
Watchdog Settings
Software Watchdog:
Boot Watchdog:
C.5 Parameters in the Server Management Information
Initial value
Sets the boot options .
BIOS setting is
(
)Continue
reflected
Displays trigger for power-on.
Displays trigger for power-off.
Sets the operation at restoring power failure.
BIOS setting is
(
)Always Power off
reflected
(
)Always Power on
(
)Restore to powered state prior to power loss
BIOS setting is
[
reflected
BIOS setting is
(
)Power Off
reflected
(
)Boot Diagnostic IDE Disk
(
)Boot PXE
(
)Boot iRMC Remote Image
BIOS setting is
[ ]
reflected
BIOS setting is
(
)Boot Option
reflected
(
)Diagnostic System
Disabled
(
)Disabled (
BIOS setting is
[ ]seconds
reflected
BIOS setting is
Sets Watchdog
reflected for Boot
Disabled
(
)Enabled
Continue
(
)Continue (
timeout delay: [
Disabled
(
)Enabled
Continue
(
)Continue (
timeout delay: [ ]minutes
17
Setting
(
)Halt on errors
]minutes
)Enabled
)Reset (
)Power Cycle
]minutes
)Reset (
)Power Cycle
Advertisement
Table of Contents
