Table of Contents
Advertisement
2
Installation Steps: Overview
This chapter contains an overview of the steps necessary to install your server.
Links guide you to sections where you can find more detailed information on the
individual steps:
Ê At first, please take notice of the safety instructions in
Information" on page 19
Ê Unpack the system, check the contents of the package for visible transport
damage and check whether the delivery agrees with the details in the
delivery note (see
Ê Transport the server to the place where you want to install it
Ê Make sure that all necessary manuals (see
tation" on page
Ê There can be additional ordered bulk components delivered with the server.
For mounting refer to the original component documentation.
Ê Set up the floorstand model (see
on page
32) or install the rack model in the rack (see
"Installing/Removing the Rack Model" on page
Ê Wire the server. Please take note of the
Server" on page 55
necting Cables" on page
Ê Connect the system to the line voltage (see
to the Mains" on page
Ê Make yourself familiar with the operating and indicator elements on the front
and on the rear side of the server (see
page
61).
TX300 S3
and following.
section "Unpacking the Server" on page
6) are available; print out the PDF files if required.
and the
section "Instructions for Connecting/Discon-
58.
57).
Operating Manual
"Additional server documen-
section "Setting up the floorstand model"
35).
section "Connecting Devices to the
section "Connecting the Server
section "Controls and Displays" on
chapter "Important
32).
section
17
Advertisement
Table of Contents
