Manually Configuring The Internet Setting - Nokia IP40 User Manual

To connect using Automatic DHCP method
If you enabled automatic DHCP, no further settings are required. The Confirmation message
appears.
1. Click Next.
The system attempts to connect to the Internet through the selected connection. The
Connecting message appears. At the end of the connection process the Connected message
appears.
Once connected, the wizard will prompt you to register your details, install the product key
and set up your subscription options, which may vary from product to product.
2. Follow the instructions until the wizard is done, and then click Finish.

Manually Configuring the Internet Setting

You can manually configure the advanced features in the IP40 using Advanced Setup.
To configure the Internet connection
1. Proceed as per steps 1 and 2 in
2. Click Cancel on the Welcome page of the Internet Setup Wizard.
The Welcome page appears.
3. In the Navigation Bar, click Network.
4. Click Edit on the Internet page
Nokia IP40 User Guide
Manually Configuring the Internet Setting
"Using the Setup Wizard."
63