Configuring And Activating Interfaces; Monitoring Network Interface Cards - Nokia EM7500 Installation Manual

11. Tighten the retaining screws that hold the chassis tray assembly.

Configuring and Activating Interfaces

The appliance automatically detects any new NIC when the appliance
is restarted. Use Network Voyager to configure and activate the logical and
physical interfaces on the NIC.
For information about how to access Network Voyager and the related
reference materials, see

Monitoring Network Interface Cards

You can asses the general operating condition of the NICs in your appliance
by looking at the LED status indicators on the NICs. The status indicators for
each NIC are explained in the NIC reference chapter.
For status indicator information for the built-in Gigabit Ethernet ports, see
"Built-In Gigabit Ethernet Ports"
For status indicator information for the four-port Ethernet NIC, see
Port 10/100 Mbps Ethernet NICs"
For status indicator information for the two-port copper Gigabit Ethernet NIC,
see "Two-Port Copper Gigabit Ethernet Network Interface Card"
IP390, 105i & 105s Security Platform Installation Guide
All manuals and user guides at all-guides.com
Chassis tray assembly retaining screws
"Using Nokia Network Voyager"
Configuring and Activating Interfaces
on page 21.
on page 61.
IP390
00525
on page 45.
"Four-
on page 65.
59