Deleting Users; Setting Up Remote Vpn Access For Users; Using Radius Authentication - Nokia IP40 User Manual

Deleting Users

You can delete users only with IP40 Satellite X.
Note
The "admin" user cannot be deleted.
To delete a user
1. In the Navigation Bar, click Users.
The Users page appears.
2. In the desired user's row, click the Erase icon.
A confirmation message appears.
3. Click OK.
The user is deleted.

Setting Up Remote VPN Access for Users

You can setup VPN access for users only with IP40 Satellite X.
If you are using IP40 as a VPN server, you can allow users to access it remotely through their
VPN clients (a Check Point SecureClient, Check Point SecuRemote, IP40 Tele 8, or another
IP40 Satellite X).
To set up remote VPN access for a user
1. Enable your VPN server using the procedure in "Setting Up Your IP40 as a VPN Server."
2. Add the user to the system, using the procedure in "Adding Users."
You must select the VPN Remote Access option.

Using RADIUS Authentication

You can use RADIUS to authenticate both IP40 users and VPN clients trying to connect to the
IP40.
When a user accesses the IP40 GUI and tries to log on, the IP40 sends the entered user name and
password to the RADIUS server. The server then checks whether the RADIUS database contains
a matching user name and password pair. If so, the user is logged on.
To use RADIUS authentication
1. Click Users in the main menu, and click the RADIUS tab.
The RADIUS page appears.
Nokia IP40 User Guide
Deleting Users
93