Setting Up Ip40 Satellite X; Setting Up Securemote; Setting Up The Nokia Ip40 Tele 8 As Vpn Client; Adding Vpn Sites By Using The Nokia Ip40 Tele 8 - Nokia IP40 User Manual

Figure 5 SecuRemote and SecureClient to Satellite X

Setting up IP40 Satellite X

Configure a VPN tunnel between SecuRemote and IP40 Satellite X.
To set up IP40 Satellite X
1. Add a User. Refer to the section "Managing Users" for more information.
2. Enable VPN Access for the User.
3. Enable VPN server.

Setting up SecuRemote

Define your VPN sites as IP40 Satellite X to set up SecuRemote.
Refer Check Point Desktop Security Guide, VPN-1 SecuRemote Client" for information on how
to Configure SecuRemote.

Setting up the Nokia IP40 Tele 8 as VPN Client

You can configure the IP40 Tele 8 as a VPN client.
To enable the VPN client functionality in your IP40
If you have subscribed to Security services, then connect with your service provider or
!
enterprise and receive a security subscription.
! If you are using the IP40 in a standalone mode, add the license manually.

Adding VPN Sites by Using the Nokia IP40 Tele 8

Using the Nokia IP40 Tele 8, you can define only remote access VPN sites. To define site-to-site
VPN gateways, you must have IP40 Satellite X.
VPN sites represent VPN gateways to which you can connect. You must define VPN sites before
you connect to them.
To add or edit VPN sites
1. In the Navigation Bar, click VPN.
The VPN Sites page appears, with a list of VPN sites.
2. Do either of the following:
a. To add a VPN site, click New Site.
b. To edit a VPN site, click Edit in the desired VPN site's row.
The Nokia VPN Site Wizard opens, as shown in the Figure below.
Nokia IP40 User Guide
Setting up the Nokia IP40 Tele 8 as VPN Client
139