Viewing Active Connections - Nokia IP40 User Manual

If you exceed the maximum number of computers allowed by your license, a warning
message appears, and the computers over the node limit are marked in red. These computers
might not be able to access the Internet through the IP40.
Note
To increase the number of computers that your license allows, you must upgrade your
product.
If desired, click the Refresh button to refresh the display.
2. To view node limit information:
a. Click Node Limit.
The Node Limit window appears with installed software product and the number of nodes
used.
b. Click Close to close the window.

Viewing Active Connections

The Viewing Active Connections option allows you to view the currently active connections
between your network and the external world. The active connections are displayed as a list,
specifying source IP address, destination IP address and port, and the protocol used (TCP, UDP,
and so on).
To view the active connections,
1. In the Navigation Bar click Reports > Active Connections.
The Active Connections Page appears.
Nokia IP40 User Guide
Viewing Reports
125