Remote Access Vpns; Configuring A Remote Access Vpn Site - Nokia IP40 User Manual

Remote Access VPNs

Configuring a Remote Access VPN Site

1. Click VPN in the main menu, and click the VPN Sites tab.
2. Click the New Site button at the bottom of the page.
3. The IP40 VPN site wizard appears.
If you select Remote Access VPN, the VPN Network Configuration dialog box appears.
To configure a remote access VPN site
1. Enter the IP address of the VPN gateway.
2. Do one of the following:
!
Note
Downloading the network configuration is only possible if you are connecting to a Check
Point VPN-1 or IP40 Satellite VPN gateway.
!
!
3. Click Next.
The following things happen in the order below:
! If you choose Specify Configuration, a second VPN Network Configuration dialog box
appears. Do the following:
a. In the Destination network column, enter up to three destination network addresses at the
b. In the Subnet mask column, select the subnet masks for the destination network
c. Click Next
Nokia IP40 User Guide
To obtain the network configuration by downloading it from the VPN site, select
Download Configuration. This option automatically configures your VPN settings by
downloading the network topology definition from the VPN server.
To provide the network configuration manually, select Specify Configuration
To route all network traffic via the site, including Internet traffic, select Route All Traffic.
VPN site to which you want to connect.
addresses.
The VPN Login dialog box appears.
!
Remote Access VPNs
131