Setting Up Nokia Ip40 With An Apple Computer; Connecting The Nokia Ip40 To The Network - Nokia IP40 User Manual

enter an IP address in the range of 192.168.10.129 to 254. Enter 255.255.255.0 as the
Subnet Mask. Click OK to save the new settings.
1. Click Obtain DNS server address automatically.
2. Click OK to save the new settings.
Your computer is now ready to access your IP40.

Setting up Nokia IP40 with an Apple Computer

Use the following procedure to set up the TCP/IP protocol:
To make TCP/IP settings
1. Choose Apple Menus > Control Panels > TCP/IP
The TCP/IP Window appears.
2. Select Ethernet from the Connect via drop-down list.
3. Select Using DHCP Server from the Configure drop-down list.
4. Close the window and save the setup.

Connecting the Nokia IP40 to the Network

The following topology examples illustrate the proper network cabling.
Nokia IP40 User Guide
Before You Install the Nokia IP40
35