Defining Backup Vpn Gateway - Nokia IP40 User Manual

13
Working with VPNs
To delete the Certificate from your IP40 device
1. On the Navigation Bar, click Services > Connect.
The Subscription Services Wizard appears.
2. Uncheck I wish to Connect to the Service Center Option
3. Click Next
4. Click Finish
5. Select the VPN button on the main menu and select the VPN Sites tab
6. The Site is automatically deleted
7. Select the VPN Certificates tab and click on Uninstall Certificate button to delete the
certificate

Defining Backup VPN Gateway

A backup VPN gateway can be defined to support the main or primary VPN gateway. If the
primary VPN gateway fails, the back up gateway takes over.
To define a backup VPN Gateway
1. Click VPN from the main menu, and select the VPN Sites tab.
2. Click the New Site button at the bottom of the page.
The VPN Site Wizard page appears.
3. Select Site to Site VPN, and click Next.
The VPN Gateway address page appears.
4. Enter the IP address of the primary Check Point management station with enforcement
module, and click Next.
The VPN Network Configuration page appears.
5. Next to Destination Network 1, enter the network address behind the primary Check Point
management station with enforcement module.
Enter 255.255.255.0 as the subnet mask.
6. Next to Destination Network 2, enter the network address behind the secondary Check Point
management station with enforcement module.
Enter 255.255.255.0 as the subnet mask.
7. Enter the IP address of the secondary Check Point management station in the Backup
Gateway field.
148 Nokia IP40 User Guide