Resetting The Ip40 To Factory Defaults - Nokia IP40 User Manual

8. Click Next.
A new browser window opens with https://support.nokia.com/agreement/
SOHOregister.html.
9. Click Finish.
The IP40 restarts and the Welcome page appears.

Resetting the IP40 to Factory Defaults

You can reset the IP40 to its default settings. When you reset your IP40, it reverts to the state it
was originally in when you purchased it, and your firmware reverts to the version that shipped
with the IP40.
Warning
This operation erases all your settings and password information. You will have to set a
new password and reconfigure your IP40 for Internet connection. For information on
performing these tasks, see "Setting up the IP40".
You can reset the IP40 to defaults via the Web management interface (software) or by manually
pressing the Reset button (hardware) located at the back of the box.
To reset the IP40 to factory defaults via the Web Interface
1. Click Setup in the main menu, and click the Tools tab.
The Tools page appears.
2. Click Factory Settings.
A confirmation message appears.
Nokia IP40 User Guide
Resetting the IP40 to Factory Defaults
121