Satellite X To Vpn-1 (Site-To-Site Vpn); Setting Up The Nokia Ip40 Satellite X - Nokia IP40 User Manual

13
Working with VPNs
To set up the remote IP40 Satellite X
1. Specify the IP address of your IP40 Satellite X.
2. Enter the Shared Secret (a password that is known to both the IP40 Satellite X devices.)

Satellite X to VPN-1 (Site-to-Site VPN)

The IP40 Satellite X to VPN-1 or Check Point v4.1, NG, FP1, FP2 , FP3 or NG AI configuration
enables you to establish site-to-site VPN connections between an IP40 Satellite X site-to-site
VPN gateway and a VPN-1 site-to-site VPN gateway.
Note
In this solution model, both the VPN-1 and IP40 Satellite X Site-to-Site VPN gateways must
have a static IP address.
The figure below shows an implementation of the IP40 Satellite X to Check Point VPN-1
solution, in which two IP40 Satellite X devices are connected to a VPN-1 site-to-site VPN
gateway.
Figure 10 Satellite X to VPN-1
Ext: 66.93.53.4/22
Int: 192.168.10.1/22
192.168.10.0/22

Setting up the Nokia IP40 Satellite X

Configure a VPN Tunnel between an IP40 Satellite X and Check Point VPN-1 server or
gateway.
To configure the IP40 Satellite X
1. Specify the IP address of IP40 Satellite X on the VPN-1 server.
2. Enter the Shared Secret (a password that is known to both the IP40 Satellite X and the VPN-
1 Server).
150
VPN-1 (Hub)
Ext: 66.93.53.2/22
Int: 192.168.1.1/22
Check Point
Firewall-1 NG
Satellite
192.168.1.0/22
Satellite
Ext: 66.93.53.3/22
Int: 192.168.11.1/22
192.168.11.0/22
00401
Nokia IP40 User Guide