Nokia IP45 Quick Start Guide Version 3.5...
Power on Your IP45 Connect the power adapter to the power port on the rear panel of the IP45, and then plug in the power adapter to a power source. The PWR LED on the front panel will light up, indicating that the IP45 is now powered on.
Configuring Your Computer Before you can use the Nokia IP45, you must configure your computer. The following steps describe how to configure a computer running Windows 98/ME or Windows 2000/XP. See the user’s guide on the CD-ROM for more information about configuring your computer if you are using any other operating system.
Enter the Gateway ID and Registration Key as defined in the central management server and click Next. The services to which you have subscribed become available on your IP45. If your IP45 is not centrally managed, ensure that the ‘I wish to connect to a Service Center’ checkbox is not checked and click Next.