Configuring Device Functions; Host Name Configuration; Date And Time Configuration - Nokia IP40 User Manual

11

Configuring Device Functions

This chapter describes how to configure the common device functions such as setting up of host
name, configuring the date and time, and system logging. The chapter also discusses how to load
factory default configuration, perform firmware upgrade and upgrade the product key.
This chapter covers the following topics:
!

"Host Name Configuration"

!

"Date and Time Configuration"

"System Logging Configuration"
!
"Network Utilities"
!
"Exporting the IP40 Configuration"
!
"Firmware Upgrade"
!
"Firmware Upgrade in Failsafe Mode"
!
"Resetting the IP40 to Factory Defaults"
!
Host Name Configuration
You can set the host name of your device using the following procedure.
To set the host name using command-line
Use the following commands to view or change your platform's host name:
show hostname
set hostname name
Refer to IP40 CLI Reference Guide for more information on setting the host name.
Date and Time Configuration
You can use the Set Time Wizard from Setup > Tools > Set Time to set the date and time for your
IP40. Refer to
time.
Nokia IP40 User Guide
on page 113
on page 113
on page 114
on page 118
"Setting the Nokia IP40 Time"
on page 114
on page 116
on page 119
on page 121
on page 39 for information on setting the date and
113