Smartcenter Lsm - Nokia IP40 User Manual

Using NHM for accessing and managing your IP40
From IP40 GUI
!
1. From your IP40 GUI, click on Setup > Management.
2. Choose IP Address Range next to SSH, and specify the IP address of Nokia Horizon
Manager.
3. Click Apply.
! From NHM Interface
1. Choose Devices > Create Devices to create an IP40 device
2. Click Nokia Small Office Series Platform - IP40 for device type
3. In the Device text box, type the Device Name (IP40) or the IP address
4. Click Yes for Use Secure connection
5. Type the device login and password
6. Click OK at the bottom of the menu. Your IP40 device is created
Refer to NHM 1.3.1 user guide for details.

SmartCenter LSM

Check Point's SmartCenter Large Scale Manager (LSM) allows you to manage many Check
Point Remote Office/Branch Office (ROBO) gateways from a single SmartCenter Server. The
Check Point LSM concept is based on Gateway Profiles which are defined in the standard Check
Point SmartDashboard. Each Gateway Profile represents many ROBO Gateways.
Refer to Check Point's SmartCenter LSM documentation for additional information on installing
and configuring LSM. A brief overview is presented below.
To configure NG AI and IP40 for site to site using LSM profiles
IP40 Side
1. Connect the IP40 to the SmartCenter.
!
!
!
!
2. Open http://my.firewall and verify the following before you proceed:
a. That Enterprise site was added to the VPN site page
b. That the LSM profile object certificate was synchronized to the device
c. Topology was loaded to the device. This should be verified from
Nokia IP40 User Guide
Click Services > Connect from the main menu
Specify the IP address of Check Point LSM, and click Next.
Type the Gateway ID and registration key as defined in Safe@ROBO in LSM (step 5),
and click Next to continue
After successful connection, the following screen appears giving a list of services to
which you have subscribed.
SmartCenter LSM
167