Nokia IP40 User Manual page 52

4
Accessing the Nokia IP40
Note
Before you start Telnet, ensure that the Telnet program is installed on your computer and
your IP40 can be accessed using Telnet. The method for starting Telnet differs between
various operating systems. The method given here can be used for starting Telnet from
Windows 2000 operating system.
If you device IP address is 192.168.10.1, your screen will appear as follows:
3. Click OK, and and the telnet command window appears with a login prompt
4. Once you enter your user name and password, you will be able to manage your IP40 using
simple commands
5. Pressing the tab key, gives you a list of useful, simple commands to start managing your
IP40. Refer to the CLI Reference Guide for more information.
52 Nokia IP40 User Guide