Connecting The Nokia Ip40 To A Computer By Using The Console Port - Nokia IP40 User Manual

4
Accessing the Nokia IP40
Connecting the Nokia IP40 to a computer by Using the Console
Port
Your IP40 has a console serial port. Connect the RS-232 cable (that is shipped along with the
appliance) from the serial port of your computer to the console port of IP40. You can then
manage the device using a terminal emulation program such as HyperTerminal.
To Connect to Nokia IP40 Using HyperTerminal
1. Start the HyperTerminal program as follows:
Start > Programs > Accessories > Communications > HyperTerminal
The Connection Description window appears.
2. Assign a name for your connection, such as IP40. Click OK.
3. Select the serial port that you will be using - COM1 or COM2. Click OK.
4. Once you have selected the serial port, the COM1 (or COM2) Properties window appears.
Select the following port settings:
50
! Bits per second: 9600
Data bits: 8
!
Parity: None
!
! Stop bits: 1
Flow control: None
!
Nokia IP40 User Guide