Customing Your Security Policy; Creating Firewall Rules - Nokia IP40 User Manual

3. In the Allow column, select the check box of the desired service or application.
If you are using IP40 Satellite X, the appropriate check box in the VPN Only column is
enabled.
4. To allow only connections made through a VPN, select the VPN Only check box.
5. In the Host IP text box of the selected service or application type the IP address of the
computer that will run the service (one of your network computers) or click the
corresponding This Computer button to allow your computer to host the service.
6. Click Apply.
A success message appears, and the selected computer is allowed to run the desired service or
application.
To restrict access from external network
1. In the Navigation Bar, click Security > Servers.
The Virtual Servers page appears, displaying a list of services and a host IP address for each
allowed service.
2. In the desired service or application row, click Clear.
The Host IP text box of the desired service is cleared.
3. Click Apply.
The service or application for the specific host is not allowed.

Customing your security policy

The below sections describe how to customize your security policy.

Creating Firewall Rules

The IP40 checks the protocol used, the ports range, and destination IP address when deciding
whether to allow or block traffic. User defined rules have priority over the default rules.
Nokia IP40 User Guide
Customing your security policy
83