Enter/Exit Programming Mode
Decode Negative Image
Enable/Disable the ability to decode a negative image for all symbologies. When this feature is
enabled, you will be unable to read normally-printed labels or programming labels in this
manual. Scan the "Disable" bar code below to return the scanner to its default for this feature.
To set the reader to decode only 2D codes, go to
187.
For additional options, see the Aladdin configuration application.
CAUTION
$P,CIPVR00,P\r
Decode Negative Image = Disable
Image Capture
For information and a list of options for Image Capture, use the Datalogic Aladdin
configuration application, available for free download from the Datalogic website.
90
Unlike some programming features and options, Decode Negative Image selec-
tions require that you scan only one programming bar code label. DO NOT scan
an ENTER/EXIT bar code prior to scanning a Decode Negative Image bar code.
When this feature is enabled, you will be unable to read other programming
labels in this manual.
$P,CI$PVR01,P\r
"2D Normal/Inverse Symbol Control" on page
DEFAULT
Decode Negative Image = Enable
Gryphon™ I GFS4400
Reading Parameters