Aztec Code Set Length 2 - Datalogic Gryphon I GFS4400 Product Reference Manual

Enter/Exit Programming Mode

Aztec Code Set Length 2

This feature specifies one of the bar code lengths for
the maximum label length if in Variable Length Mode, or the second fixed length if in Fixed
Length Mode. Characters can be set from 0001 to 3,832 characters in increments of 0001 (pad
with zeroes).
See page 253
$CAZL2
Select Aztec Code Length 2 Setting
Make a mistake? Scan the CANCEL bar code to abort and
not save the entry string. You can then start again at the
beginning.
190
for detailed instructions on setting this feature.
DEFAULT
Aztec Code Length
To configure this feature, scan the ENTER/EXIT PROGRAM-
MING MODE bar code above, then the bar code at left fol-
lowed by the digits from the Alphanumeric characters in
Appendix E, Keypad
ter(s). End by scanning the ENTER/EXIT bar code again.
~
Length 2 is 3,832 Characters
2D Symbologies
Control. Length 2 is
representing your desired charac-
CANCEL
Gryphon™ I GFS4400