Decode Negative Image - Datalogic DSM0400 Product Reference Manual

Decode Negative Image

Enable/Disable the ability to decode a negative image for all symbologies.
When this feature is enabled, you will be unable to read normally-printed labels
or programming labels in this manual. Scan the "Disable" bar code below to
return the scanner to its default for this feature. To set decoding for only 2D
codes, go to
options, see the Aladdin configuration application.
CAUTION
Decode Negative Image = Disable
70
"2D Normal/Inverse Symbol Control" on page
Unlike some programming features and options, Decode Negative
Image selections require that you scan only one programming bar code
label. DO NOT scan an ENTER/EXIT bar code prior to scanning a Decode
Negative Image bar code.
NOTE
When this feature is enabled, you will be unable to read other program-
ming labels in this manual.
Decode Negative Image = Enable
DSM0400 Fixed Mount Area Imager Bar Code Reader
165. For additional
DEFAULT