Multiple Labels Ordering By Code Symbology; Multiple Labels Ordering By Code Length - Datalogic Gryphon I GFS4400 Product Reference Manual

Reading Parameters

Multiple Labels Ordering by Code Symbology

This feature allows you to specify the order multiple labels are transmitted by symbology type,
when Multiple Labels per Frame is enabled. See
information on setting this feature.
$CSNMS
Select Symbologies for Multiple Labels Ordering
Make a mistake? Scan the CANCEL bar code to abort and
not save the entry string. You can then start again at the
beginning.

Multiple Labels Ordering by Code Length

Specifies the transmission ordering by code length, when Multiple Labels per Frame is enabled.
$CSNMT01(CR)
Transmit Increasing Length Order
92
000000000000 = Random order
DEFAULT
DEFAULT
page 272 in "References" for detailed
To configure this feature, scan the ENTER/EXIT PROGRAM-
MING MODE bar code above, then the bar code at left fol-
lowed by the digits From the alphanumeric characters In
Appendix d, keypad representing your desired Charac-
ter(s). End by scanning the enter/exit bar code again.
~
CANCEL
$CSNMT00(CR)
Multiple Labels Ordering = Disable
$CSNMT02(CR)
Transmit Decreasing Length Order
Gryphon™ I GFS4400