Code 93 Set Length 1 - Datalogic Gryphon I GFS4400 Product Reference Manual

Enter/Exit Programming Mode

Code 93 Set Length 1

Specifies one of the bar code lengths for
label length if in
Length includes the bar code's data characters only. The length can be set from 01 to 50
characters.
Table 19
setting this feature.
Table 19. Code 93 Length 1 Setting Examples
STEP ACTION
1 Desired Setting
2
3
Scan Two Characters From
4
Appendix E, Keypad
5
$CC9L1
Select Code 93 Set Length 1 Setting
Make a mistake? Scan the CANCEL bar code to abort and
not save the entry string. You can then start again at the
beginning.
174
Variable Length Mode, or the first fixed length if in
provides some examples for setting Length 1. See
01 Characters
Scan ENTER/EXIT PROGRAMMING MODE
Scan SELECT CODE 93 LENGTH 1 SETTING
'0' and '1'
Scan ENTER/EXIT PROGRAMMING MODE
DEFAULT
Code 93 Length Control. Length 1 is the minimum
page 253
EXAMPLES
07 Characters 15 Characters
'0' and '7'
~
01 = Length 1 is 1 Character
Symbologies
Fixed Length Mode.
for detailed instructions on
50 Characters
'1' and '5' '5' AND '0'
CANCEL
Gryphon™ I GFS4400