Code 93 Set Length 2 - Datalogic Gryphon I GFS4400 Product Reference Manual

Symbologies

Code 93 Set Length 2

This feature specifies one of the bar code lengths for
maximum label length if in
Mode. Length includes the bar code's check, data, and full-ASCII shift characters. The length
does not include start/stop characters. The length can be set from 1 to 50 characters. A setting of
0 specifies to ignore this length (only one fixed length).
Table 20
setting this feature.
Table 20. CODE 93 Length 2 Setting Examples
STEP ACTION
1 Desired Setting
2
3
Scan Two Characters From
4
Appendix E, Keypad
5
$CC9L2
Select Code 93 Length 2 Setting
Make a mistake? Scan the CANCEL bar code to abort and
not save the entry string. You can then start again at the
beginning.
Product Reference Guide
Variable Length
provides examples for setting Length 2. See
00 (Ignore This
Length)
Scan ENTER/EXIT PROGRAMMING MODE
Scan SELECT CODE 93 LENGTH 2 SETTING
'0' and '0'
Scan ENTER/EXIT PROGRAMMING MODE
50 = Length 2 is 50 Characters
DEFAULT
Enter/Exit Programming Mode
Code 93 Length
Mode, or the second fixed length if in
page 253 for detailed instructions on
EXAMPLES
07 Characters 15 Characters
'0' and '7' '1' and '5'
~
CANCEL
Control. Length 2 is the
Fixed Length
50 Characters
'5' AND '0'
175