Decode Negative Image; Image Capture - Datalogic QuickScan QD2590 Product Reference Manual

ENTER/EXIT PROGRAMMING MODE

Decode Negative Image

Enable/Disable the ability to decode a negative image for all symbologies. When this
feature is enabled, you will be unable to read normally-printed labels or programming
labels in this manual. Scan the "Disable" bar code below to return the reader to its
default for this feature. To set decoding for only 2D codes, go to "
Symbol Control
application.
$CIPVR00
Decode Negative Image = Enable

Image Capture

For information and a list of options for Image Capture, use the Datalogic Aladdin con-
figuration application, available for free download from the Datalogic Scanning website.
100
QUICKSCAN™ QD2590
" on . For additional options, see the Aladdin configuration
page 192
NOTE: Unlike some programming features and options, Decode Negative
Image selections require that you scan only one programming bar code
label. DO NOT scan an ENTER/EXIT bar code prior to scanning a Decode
Negative Image bar code.
CAUTION: When this feature is enabled, you will be unable to read other
programming labels in this manual.
READING PARAMETERS

Decode Negative Image = Disable
$CIPVR01
2D Normal/Inverse