Decode Negative Image; Image Capture - Datalogic PowerScan PBT950X Product Reference Manual

Decode Negative Image

Enable/Disable the ability to decode a negative image for all symbologies.
When this feature is enabled, you will be unable to read normally-printed
labels or programming labels in this manual. Scan the "Disable" bar code
below to return the scanner to its default for this feature.
The reader can also be set to decode both positive and negative codes for
certain 2D codes. See
information on this feature.
For additional options, see the Aladdin configuration application.
CAUTION
Decode Negative Image = Disable

Image Capture

Image capature is supported by RS-232 and USB-COM interfaces only. For
information and a list of options for Image Capture, use the Datalogic Alad-
din configuration application, available for free download from the Data-
logic Scanning website.
Product Reference Guide
"2D Normal/Inverse Symbol Control" on page 176
Unlike some programming features and options, Decode Negative
Image selections require that you scan only one programming bar
code label. DO NOT scan an ENTER/EXIT bar code prior to scanning a
Decode Negative Image bar code.
When this feature is enabled, you will be unable to read other pro-
gramming labels in this manual.
Enter/Exit Programming Mode
DEFAULT
Decode Negative Image = Enable
for
77