Enter/Exit Programming Mode
Beep On Not on File
This option enables/disables the action of the reader to sound a three beep sequence upon
receiving a Not-On-File (NOF) host command.
$CBPNF00(CR)
Beep On Not On File = Disable
DEFAULT
ACK NAK Options
This enables/disables the ability of the reader to support the RS-232 ACK/NAK protocol.
See
page 246
DEFAULT
$CR2AE01(CR)
ACK/NAK Protocol = Enable for label transmission
$CR2AE03(CR)
ACK/NAK Protocol = Enable for label transmission and
host-command acknowledge
32
for more information.
$CBPNF01(CR)
Beep On Not On File = Enable
$CR2AE00(CR)
ACK/NAK Protocol = Disable ACK/NAK
$CR2AE02(CR)
ACK/NAK Protocol = Enable for host-command
acknowledge
RS-232/USB-Com Interfaces
Gryphon™ I GFS4400