Label Id; Label Id: Pre-Loaded Sets - Datalogic Gryphon I GFS4400 Product Reference Manual

Data Format

Label ID

A Label ID is a customizable code of up to three ASCII characters (convert to Hex using the
ASCII Chart on the inside back cover of this manual), used to identify a bar code symbology
type. It can be appended previous to or following the transmitted bar code data depending upon
how this option is enabled. This feature provides options for configuring custom Label IDs or
individually per symbology (see "Individually Set Label ID" on page 57). If you wish to
program the reader to always include an industry standard label identifier for ALL symbology
types, see the previous feature "Global AIM ID" on page 53.
See Label ID, starting on page 257

Label ID: Pre-Loaded Sets

The reader supports two pre-loaded sets of Label IDs. See
page 257
CAUTION
DEFAULT
$P,Ae,P\r
Label ID Pre-loaded Set = EU Set
56
for details on the USA set and EU set.
Unlike some programming features and options, this feature requires that you
scan only one programming bar code label. DO NOT scan an ENTER/EXIT bar
code prior to scanning the bar codes below.
When changing from one Label ID set to another, all other reader configuration
settings, including the host interface type, will be erased and set to the stan-
dard factory defaults. Any custom configuration or custom defaults will be lost.
of "References" for more information on setting this feature.
Label ID: Pre-loaded Sets, starting on
$P,AE,P\r
Label ID Pre-loaded Set = USA Set
Gryphon™ I GFS4400