Multiple Label Reading; Multiple Labels Per Frame - Datalogic Gryphon I GFS4400 Product Reference Manual

Reading Parameters

MULTIPLE LABEL READING

When the reader's aiming system is activated by a trigger push or other method (depending on
the mode), it then acquires and processes each image in the area in front of it (the Volume). In
this case, the scanner stops processing the image once it decodes a label. If several labels are
present in the volume, only the first label encountered is decoded and sent.
When Multiple Reading Mode is enabled, the scanner keeps on processing the image until all
the labels present are decoded. The reader then sorts the data from all the bar codes (if
configured to do so) before transmitting it.

Multiple Labels per Frame

Specifies the ability of the reader to decode and transmit a set of code labels in a specific volume
and in a single frame of time. When in Multiple Labels per Frame the reader beeps and turns on
the good read LED indication for each code read in a frame.
When Multiple Labels Mode is enabled, ISBT pairing, ABC Codabar pairing, and composites
are not allowed.
$CSNML00(CR)
DEFAULT
Multiple Labels per Frame = Disable
$CSNML01(CR)
Multiple Labels per Frame = Enable
Product Reference Guide 91