Attaching Reader To Host - Datalogic Gryphon I GFS4400 Product Reference Manual

Setup

Attaching Reader to Host

RS-232 Serial Connection
Turn off power to the terminal/PC and connect the reader to the terminal/PC serial port via the
RS-232 cable as shown in
Terminal) to supply reader power, use the approved power supply (AC Adapter). Plug the AC
Adapter barrel connector into the socket on the RS-232 cable connector and the AC Adapter
plug into a standard power outlet.
Figure 1. RS-232 Connection
USB Connection
Connect the reader to a USB port on the terminal/PC. Reference
Figure 2. USB connection
14
. If the terminal will not support POT (Power Off the
Figure 1
Attaching Reader to Host
.
Figure 2
Gryphon™ I GFS4400