Data Matrix Set Length 2 - Datalogic Gryphon I GFS4400 Product Reference Manual

Enter/Exit Programming Mode

Data Matrix Set Length 2

This feature specifies one of the bar code lengths for
the maximum label length if in Variable Length Mode, or the second fixed length if in Fixed
Length Mode. Characters can be set from 0001 to 3,116 characters in increments of 0001 (pad
with zeroes).
See page 253
$CDML2
Select Data Matrix Length 2 Setting
Make a mistake? Scan the CANCEL bar code to abort and
not save the entry string. You can then start again at the
beginning.
196
for detailed instructions on setting this feature.
DEFAULT
Data Matrix Length
To configure this feature, scan the ENTER/EXIT PRO-
GRAMMING MODE bar code above, then the bar code
at left followed by the digits from the Alphanumeric
Appendix E, Keypad
characters in
desired character(s). End by scanning the ENTER/EXIT
bar code again.
~
Length 2 is 3,116 Characters
2D Symbologies
Control. Length 2 is
representing your
CANCEL
Gryphon™ I GFS4400