Intercode Delay; Caps Lock State - Datalogic Gryphon I GFS4400 Product Reference Manual

USB Keyboard Settings

Intercode Delay

Specifies the delay between labels transmitted to the host for this interface. The selectable range
for this feature is from 0 to 99 seconds.
See page 252
$CKBID
Set Intercode Delay
Make a mistake? Scan the CANCEL bar code to abort and
not save the entry string. You can then start again at the
beginning.

Caps Lock State

This option specifies the format in which the reader sends character data. This does not apply
when an alternate key encoding keyboard is selected.
DEFAULT
$CKBCL01(CR)
Caps Lock State = Caps Lock ON
Product Reference Guide
in "References" for detailed information and examples for setting this feature.
DEFAULT
To configure this feature, scan the ENTER/EXIT PROGRAM-
MING MODE bar code above, then the bar code at left fol-
lowed by the digits from the Alphanumeric characters in
Appendix E, Keypad representing your desired charac-
ter(s). End by scanning the ENTER/EXIT bar code again.
~
00 = No Intercode Delay
$CKBCL00(CR)
Caps Lock State = Caps Lock OFF
$CKBCL02(CR)
Caps Lock State = AUTO Caps Lock Enable
Enter/Exit Programming Mode
CANCEL
43