China Sensible Code Set Length 2 - Datalogic Gryphon I GFS4400 Product Reference Manual

2D Symbologies

China Sensible Code Set Length 2

This feature specifies one of the bar code lengths for
Length 2 is the maximum label length if in Variable Length Mode, or the second fixed length if
in Fixed Length Mode. Characters can be set from 0001 to 7,827 characters in increments of
0001 (pad with zeroes).
See page 253
$CCSL2
Select China Sensible Code Length 2 Setting
Make a mistake? Scan the CANCEL bar code to abort and
not save the entry string. You can then start again at the
beginning.
Product Reference Guide
for detailed instructions on setting this feature.
DEFAULT
China Sensible Code Length
To configure this feature, scan the ENTER/EXIT PRO-
GRAMMING MODE bar code above, then the bar code
at left followed by the digits from the Alphanumeric
Appendix E, Keypad
characters in
desired character(s). End by scanning the ENTER/EXIT
bar code again.
~
Length 2 is 7,827 Characters
Enter/Exit Programming Mode
Control.
representing your
CANCEL
193