Table of Contents
Advertisement
3.2 Installation
The following guide is designed to lead users through Web Configuration of G.shdsl.bis EFM Modem in the
easiest and quickest way possible. Please follow the instructions carefully.
1.
Connect the power adapter to the port labeled "DC" on the rear panel of the EFM modem.
2.
Connect the Ethernet cable to MGMT port.
(Note: The EFM modem supported auto-MDIX switching hub so both straight through and cross-over
Ethernet cable can be used.)
3.
Connect the phone cable to the EFM modem and the other side of phone cable to wall jack.
4.
Connect the power adapter to power source.
5.
Turn on the PC or NB, which is used for configuration the EFM modem.
!
To avoid possible damage to this EFM modem, do not turn on the EFM modem before Hardware
Installation.
Connection with SHDSL .Bis EFM Modem
3010E/3020E/3040E G.SHDSL.bis EFM Bridge Modem User's Manual Ver:A2
17
Advertisement
Table of Contents
