Configuration Using A Web Browser; Configuration Method; Web Configuration; Serial Console Configuration - netsys G.SHDSL.bis 3010E User Manual

G.shdsl.bis efm bridge modem
Table of Contents

Advertisement

3 Configuration using a Web Browser

3.1 Configuration method

There are three methods to configure the EFM modem: serial console, Telnet and Web Browser. Users have
to choose one method to configure the EFM modem.

3.1.1 Web configuration

Make sure that Ethernet Adapter had been installed in PC or NB used for configuration of the modem. TCP/IP
protocol is necessary for web configuration, so please check the TCP/IP protocol whether it has been
installed.
The EFM modem provides a browser interface that lets you configure and manage the EFM modem. After you
set up your IP address for the EFM modem. You can access the EFM modem's Web interface applications
directly in your browser by entering the IP address of the EFM modem. You can then use your Web browser to
list and manage configuration parameters from PC.
Web Configuration requires Internet Explorer 5.0 or later or Netscape Navigator 6.0 and later versions. The
recommended screen resolution is 1024 by 768 pixels.

3.1.2 Serial console configuration

For Serial Console, users can directly connecting a terminal or a PC equipped with a terminal-emulation
program (such as Hyper Terminal) to the EFM modem's serial console port.
Use the supplied serial cable (RJ-45 to DB9F) is required to connect the EFM modem to PC. After marking
this connection, configure the terminal-emulation program to use the following parameters: 9600 bps , 8 data
bits , no parity and 1 stop bit.

3.1.3 Telnet configuration

Make sure that Ethernet Adapter had been installed in PC or NB used for configuration of the modem. The
EFM modem also supports telnet for remote configuration. The command is "telnet 192.168.1.1" . It with
asks for user name and password for remote login when using telnet, please use "admin" for username and
"admin" for password. All display screen are as same as serial console configuration.
The IP address 192.168.1.1 is the default value and you can change to another one for you application.
3010E/3020E/3040E G.SHDSL.bis EFM Bridge Modem User's Manual Ver:A2
16

Advertisement

Table of Contents
loading

This manual is also suitable for:

G.shdsl.bis 3020eG.shdsl.bis 3040e

Table of Contents