Community Pool - netsys G.SHDSL.bis 3010E User Manual

3.7.2.1 Community Pool

An SNMP community is the group that devices and management stations running SNMP belong to. It helps
define where information is sent. The community name is used to identify the group. A SNMP device or agent
may belong to more than one community. It will not requests from management stations that do not belong to
one of its communities.
SNMP default communities are:
Access Right Community
Read public
Write private
Press Modify to set up community pool.
In the table of current community pool, you can setup the access authority.
Status: Enable: for turn on the SNMP function
Disable: for turn off the SNMP function
Access Right: Deny for deny all access
Read for access read only
Write for access read and write.
Community: It serves as password for access right.
After configuring the community pool, press Finish.
The browser will prompt the configured parameters and check it before writing into NVRAM.
Press Restart to restart the EFM modem working with the new parameters and press Continue to setup other
parameters.
3010E/3020E/3040E G.SHDSL.bis EFM Bridge Modem User's Manual Ver:A2
54