Queue Weight - netsys G.SHDSL.bis 3010E User Manual

-----------------------------------------------------------------------------
Command: setup qos qSchdl <Type1|Type2| Type3|>
Message: Please input the following information.
Operation type (TAB Select) <Type1>: Type1
-----------------------------------------------------------------------------
The queuing algorithms:
WRR Weight Round Robin
WFQ Weighted Fair Queuing
BE Best Effort
SP Strictly Priority
Queue Schedule:
Queue Schedule □Type 1

4.4.4.3 Queue weight

This setting can set weight value on each queue for WRR configuration.
-----------------------------------------------------------------------------
Command: setup qos qweight <0~3> <1~15>
Message: Please input the following information.
Queue index <0~3>: 0
Weight value (ENTER for default) <1>: 1
-----------------------------------------------------------------------------
For example, the default values are as following
[ setup qos qweight 0 1]
[ setup qos qweight 1 2]
[ setup qos qweight 2 4]
[ setup qos qweight 3 8]
Queue Weight:
Queue Index 0 1 2
Weight Value
3010E/3020E/3040E G.SHDSL.bis EFM Bridge Modem User's Manual Ver:A2
□Type 2 □Type 3
3
77