Trap Host Pool - netsys G.SHDSL.bis 3010E User Manual

3010E/3020E/3040E G.SHDSL.bis EFM Bridge Modem User's Manual Ver:A2

3.7.2.2 Trap Host Pool

In the table of current trap host pool, you can setup the trap host.
SNMP trap is an informational message sent from an SNMP agent to a manager. It is a management station
(SNMP application) that receives traps.
If no trap host pool is defined, no traps are issued.
Press Modify to set up trap host pool.
Version: select version for trap host. (Version 1 is for SNMPv1; Version 2 for SNMPv2).
Disable for turn off
IP Address: type the trap host IP address
Community: type the community password.
Press OK to finish the setup.
The browser will prompt the configured parameters and check it before writing into NVRAM.
Press Restart to restart the EFM modem working with the new parameters and press Continue to setup other
parameters.
55