1. Manuals
  2. Brands
  3. netsys Manuals
  4. Modem
  5. G.SHDSL.bis 3010E
  6. User manual

netsys G.SHDSL.bis 3010E User Manual

G.shdsl.bis efm bridge modem
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
G.SHDSL.bis 3010E/3020E/3040E
User's Manual
Version: A2

Advertisement

Table of Contents
loading

Related Manuals for netsys G.SHDSL.bis 3010E

Summary of Contents for netsys G.SHDSL.bis 3010E

  • Page 1 G.SHDSL.bis 3010E/3020E/3040E User’s Manual Version: A2...

  • Page 2: Table Of Contents

    3010E/3020E/3040E G.SHDSL.bis EFM Bridge Modem User’s Manual Ver:A2 TABLE OF CONTENTS INTRODUCTION............................6 ............................. 6 ESCRIPTION ............................7 EATURES ..........................8 PECIFICATIONS ............................ 9 PPLICATIONS GETTING TO KNOW ABOUT THE EFM MODEM ................. 10 ..........................10 RONT ANEL ............................ 12 ANEL 2.2.1 WAN Port...........................
  • Page 3 3010E/3020E/3040E G.SHDSL.bis EFM Bridge Modem User’s Manual Ver:A2 3.5.3 QoS............................36 3.5.3.1 Port Based Priority ........................37 3.5.3.2 VLAN Tag Priority .......................... 41 3.5.3.3 IP DSCP Priority ..........................44 3.5.4 Rate Limiting ..........................47 3.5.5 Flow Control ..........................47 ............................48 TATUS 3.6.1 SHDSL .Bis EFM........................
  • Page 4 3010E/3020E/3040E G.SHDSL.bis EFM Bridge Modem User’s Manual Ver:A2 4.4.1.8 Clear..............................71 4.4.2 LAN............................71 4.4.3 VLAN ............................72 4.4.3.1 Mode ..............................72 4.4.3.2 802.11Q VLAN ..........................73 4.4.3.3 Port Based VLAN ..........................74 4.4.4 QoS............................76 4.4.4.1 Mode ............................... 76 4.4.4.2 Queue schedule ..........................
  • Page 5 3010E/3020E/3040E G.SHDSL.bis EFM Bridge Modem User’s Manual Ver:A2 4.10.4 Supervisor Password and ID....................96 4.10.4.1 Supervisor Password ........................97 4.10.4.2 Supervisor ID ..........................97 4.11 ............................98 TILITY 4.11.1 Upgrade main software....................... 98 4.11.2 Backup system configuration .................... 98 4.11.3 Restore system configuration....................

  • Page 6: Introduction

    3010E/3020E/3040E G.SHDSL.bis EFM Bridge Modem User’s Manual Ver:A2 1 Introduction 1.1 Description The EFM Based Network Extender provides a flexible and friendly solution for the Ethernet based services provision to subscribers by the service provider. Additionally, this family of products provides a simple way in a back-to-back deployment to provide point to point configuration.

  • Page 7: Features

    3010E/3020E/3040E G.SHDSL.bis EFM Bridge Modem User’s Manual Ver:A2 1.2 Features Extending Ethernet Services to sites with existing copper infrastructure EFM up to 15.3 Mbps max./pair (TC-PAM 128) EFM Bonding up to 61 Mbps (4 pairs, TC-PAM 128) Support EFM mode Flexible and Rapid Service Deployment Flexible configuration as CPE or CO Support EFM OAM complying IEEE 802.3ah...

  • Page 8: Specifications

    3010E/3020E/3040E G.SHDSL.bis EFM Bridge Modem User’s Manual Ver:A2 1.3 Specifications LAN : RJ45 x 4 Range1~4094) Network Interface Management Port: RJ45 x 1 VLAN Stacking (Q-in-Q) 4 –port switching hub Console Port: RJ45 x 1 QoS Support 10/100BASE-T Reset Button: Load Factory Rate limiting by auto-negotiation &...

  • Page 9: Applications

    3010E/3020E/3040E G.SHDSL.bis EFM Bridge Modem User’s Manual Ver:A2 1.4 Applications...

  • Page 10: Getting To Know About The Efm Modem

    3010E/3020E/3040E G.SHDSL.bis EFM Bridge Modem User’s Manual Ver:A2 2 Getting to know about the EFM Modem This section will introduce hardware of the EFM modem. 2.1 Front Panel The front panel contains LED which show status of the EFM Modem.
  • Page 11 3010E/3020E/3040E G.SHDSL.bis EFM Bridge Modem User’s Manual Ver:A2 LED status of EFM Modem: LEDs Active Description Power on Blue: CO mode Green: CPE mode SHDSL.bis line connection is dropped Blink SHDSL.bis self-test MGMT Management port line connection is established SHDSL.bis line 1 connection is established LINK 1 Blink SHDSL.bis line 1 handshake...

  • Page 12: Rear Panel

    3010E/3020E/3040E G.SHDSL.bis EFM Bridge Modem User’s Manual Ver:A2 2.2 Rear Panel The rear panel of G.SHDSL.bis EFM Modem where all of the connections are made. Connector Description DC-IN Power adaptor inlet: Input voltage range from 9V to 18V. CONSOLE RJ-45 for system configuration and maintenance Reset button for reboot or load factory default LAN (1,2,3,4) 10/100BaseT auto-sensing and auto-MDIX for LAN port (RJ-45)

  • Page 13: Wan Port

    3010E/3020E/3040E G.SHDSL.bis EFM Bridge Modem User’s Manual Ver:A2 2.2.1 WAN Port The EFM modem have one port for WAN port connection, this is a G.SHDSL .bis interface The pin assignments for SHDSL line cable are: For one pair (2-wire) model, Loop1 has been used For two pair (4-wire) model, Loop1 and 2 have been used For four pair (8-wire) model, Loop1, 2, 3 and 4 have been used 2.2.2 LAN ports and MGMT port...
  • Page 14 3010E/3020E/3040E G.SHDSL.bis EFM Bridge Modem User’s Manual Ver:A2 The pin assignment of RJ-45 modular jack on the console cable: Pin Number Abbrev. Description Figure none none DTE ready Signal Ground Received Data Front View Transmitted Data none Top View none...

  • Page 15: Power Connection

    3010E/3020E/3040E G.SHDSL.bis EFM Bridge Modem User’s Manual Ver:A2 2.2.4 Power connection Make sure you are using the correct power source as the AC/DC adapter. Inset the female end of power adapter’s cord into the power receptacle on the rear panel. Connect the power adapter to an appropriate power source.

  • Page 16: Configuration Using A Web Browser

    3010E/3020E/3040E G.SHDSL.bis EFM Bridge Modem User’s Manual Ver:A2 3 Configuration using a Web Browser 3.1 Configuration method There are three methods to configure the EFM modem: serial console, Telnet and Web Browser. Users have to choose one method to configure the EFM modem. 3.1.1 Web configuration Make sure that Ethernet Adapter had been installed in PC or NB used for configuration of the modem.

  • Page 17: Installation

    3010E/3020E/3040E G.SHDSL.bis EFM Bridge Modem User’s Manual Ver:A2 3.2 Installation The following guide is designed to lead users through Web Configuration of G.shdsl.bis EFM Modem in the easiest and quickest way possible. Please follow the instructions carefully. Connect the power adapter to the port labeled “DC” on the rear panel of the EFM modem. Connect the Ethernet cable to MGMT port.

  • Page 18: Setup Up On Web Browser

    3010E/3020E/3040E G.SHDSL.bis EFM Bridge Modem User’s Manual Ver:A2 3.3 Setup up on Web Browser This section introduces the configuration and functions of the web-based management. It is an HTML-based management interface that allows easy EFM modem setup and management. The EFM modem offers all monitoring and management features that allow users to manage this EFM modem form anywhere on the network through a standard browser such as Internet Explorer.

  • Page 19: Basic Setup

    3010E/3020E/3040E G.SHDSL.bis EFM Bridge Modem User’s Manual Ver:A2 The default user name and password both is root. For the system security, suggest changing them after configuration. Note: For safety purpose, the password will be prompt as star symbol. Note: After changing the User Name and Password, we strongly recommend you to save them because the next time you login, you have to use the new User Name and Password.
  • Page 20 3010E/3020E/3040E G.SHDSL.bis EFM Bridge Modem User’s Manual Ver:A2...

  • Page 21: Operation Mode And Mgmt

    3010E/3020E/3040E G.SHDSL.bis EFM Bridge Modem User’s Manual Ver:A2 3.4.1 Operation mode and MGMT Click Basic for basic installation. Click CPE (Customer Premises Equipment) side or CO (Central Office) side to setup the operation mode. When connection with EFM DSLAM, the SHDSL.bis EFM modem’s working mode is CPE. When “LAN to LAN”...

  • Page 22: Dhcp Server

    3010E/3020E/3040E G.SHDSL.bis EFM Bridge Modem User’s Manual Ver:A2 3.4.2 DHCP server Press Next to set the next page: Dynamic Host Configuration Protocol (DHCP) is a communication protocol that lets network administrators to manage centrally and automate the assignment of Internet Protocol (IP) addresses in an organization's network.

  • Page 23: Lan

    3010E/3020E/3040E G.SHDSL.bis EFM Bridge Modem User’s Manual Ver:A2 range is from 1 to 254. That means you cannot assign an IP greater than 254 or less than 1. Lease time 72 hours indicates that the DHCP server will reassign IP information in every 72 hours. The default value is 72 hours .You can set up from 1 to 720 hours according to your application.

  • Page 24: Review

    3010E/3020E/3040E G.SHDSL.bis EFM Bridge Modem User’s Manual Ver:A2 DNS Server 2: 168.95.192.1 DNS Server 3: 3.4.4 Review Press Next to set the next page: The screen will prompt the new configured parameters. Checking the parameters and Click Restart Then the EFM modem will reboot and start working with new parameters or press or Continue to configure other parameters.

  • Page 25: Advanced Setup

    3010E/3020E/3040E G.SHDSL.bis EFM Bridge Modem User’s Manual Ver:A2 3.5 Advanced Setup Note: The advanced functions are only for advanced users to setup advanced functions. The incorrect setting of advanced function will affect the performance or system error, even disconnection. In “ADVANCED” section, users are allowed to change settings by different areas: SHDSL.bis EFM, QoS, Rate Limiting, VLAN, and Flow Control.

  • Page 26: Link Type

    3010E/3020E/3040E G.SHDSL.bis EFM Bridge Modem User’s Manual Ver:A2 3.5.1.1 Link Type Line type means how many wire you want to use on SHDSL.bis connection. Line Type 2-wire EFM Modem 2-wire model ● 3.5.1.2 Annex Type There are two Annex types: Annex AF and Annex BG in SHDSL.bis . Check with your ISP about it. 3.5.1.3 TCPAM Type The default option is Auto.

  • Page 27: Snr Margin

    3010E/3020E/3040E G.SHDSL.bis EFM Bridge Modem User’s Manual Ver:A2 3.5.1.5 SNR margin SNR margin is an index of line connection quality. You can see the actual SNR margin in STATUS SHDSL.bis. The larger is SNR margin; the better is line connection quality. For example, if you set SNR margin in the field as 5, the SHDSL.bis connection will drop and reconnect when the SNR margin is lower than 5.

  • Page 28: Vlan

    3010E/3020E/3040E G.SHDSL.bis EFM Bridge Modem User’s Manual Ver:A2 3.5.2 VLAN Click VLAN to configure VLAN. VLAN (Virtual Local Area Network) allows a physical network to be partitioned into multiple logical networks. Devices on a logical network belong to one group. A device can belong to more than one group. With VLAN, a device cannot directly talk to or hear from devices that are not in the same group.

  • Page 29: Tag-Based Vlan

    3010E/3020E/3040E G.SHDSL.bis EFM Bridge Modem User’s Manual Ver:A2 3.5.2.1 Tag-Based VLAN Click the Tag-Based VLAN to configure the EFM modem. Check if you want to apply this rule. VID: VLAN ID MGMT: Check if you want this rule to manage the modem. Port: port interfaces, including LAN1, LAN2, LAN3, LAN4, and DSL.
  • Page 30 3010E/3020E/3040E G.SHDSL.bis EFM Bridge Modem User’s Manual Ver:A2 EXAMPLE: Port S-VLAN Tunnel Group Enable LAN1 LAN2 LAN3 LAN4 Mode PVID “VID” is basically for grouping port interfaces. This means only group members can access the other group members. For example, there is a VID group with LAN1, LAN3 and DSL. This means packets come from DSL can only access to LAN1 and LAN3.
  • Page 31 3010E/3020E/3040E G.SHDSL.bis EFM Bridge Modem User’s Manual Ver:A2 frame according to the PVID (port VLAN) port definition. Typically, most switches today have all ports are set to a default PVID of 1. When a tagged frame arrives at a switch port the tag is respected. A VID defines the member of a port group.
  • Page 32 3010E/3020E/3040E G.SHDSL.bis EFM Bridge Modem User’s Manual Ver:A2 performance through reduced broadcast traffic. VLAN groups can be modified at any time by adding, moving or changing ports without any re-cabling. Before enabling VLANs for the EFM modem, you must first assign each port to the VLAN group(s) in which it will participate.

  • Page 33: Port-Based Vlan

    3010E/3020E/3040E G.SHDSL.bis EFM Bridge Modem User’s Manual Ver:A2 Untagged VLANs – Untagged (or static) VLANs are typically used to reduce broadcast traffic and to increase security. A group of network users assigned to a VLAN form a broadcast domain that is separate from other VLANs configured on the EFM modem.
  • Page 34 3010E/3020E/3040E G.SHDSL.bis EFM Bridge Modem User’s Manual Ver:A2 MGMT: check if the rule is for management purpose. Port: port interfaces, including LAN1, LAN2, LAN3, LAN4, and DSL. Check the port interface you need if you want to include the port. Access: allows all packets passing through the port interface Tunnel:...
  • Page 35 3010E/3020E/3040E G.SHDSL.bis EFM Bridge Modem User’s Manual Ver:A2 Group ID = 1 This group is allowed to manage the EFM modem. LAN1, LAN2 and DSL are in this group. Only LAN2 (in “Tunnel” mode) will check the VLAN ID of incoming packets. The VLAN ID should be equal to 10 and its TPID should be “0x8100”.

  • Page 36: Qos

    3010E/3020E/3040E G.SHDSL.bis EFM Bridge Modem User’s Manual Ver:A2 3.5.3 QoS QoS(Quality of Service) refers to both a network’s ability to deliver data with minimum delay, and the networking methods used to control the use of bandwidth. Without QoS, all traffic date is equally likely to be dropped when the network is congested.

  • Page 37: Port Based Priority

    3010E/3020E/3040E G.SHDSL.bis EFM Bridge Modem User’s Manual Ver:A2 3.5.3.1 Port Based Priority When you click Port Based Priority, it will show the following: Select the ports to which the rule should be applied. There have six ports can be applied: LAN1, LAN2, LAN3, LAN4, DSL and Sniffing For Port Based Priority, it can setup the queue type from type 0 to type 3.
  • Page 38 3010E/3020E/3040E G.SHDSL.bis EFM Bridge Modem User’s Manual Ver:A2 WRR (Weighted Round Robin): All received packets will be stored into queue 1, queue 2, queue 3, and queue 4. Users will assign a weighting for each queue. Then, WRR will re-pack all packets from four queues based on the weightings.
  • Page 39 3010E/3020E/3040E G.SHDSL.bis EFM Bridge Modem User’s Manual Ver:A2 SP (Strictly Priority): Strictly Priority Algorithm simply follows priorities only. This means the algorithm transmits the highest priority queue first, then, the next highest priority queue, and so on. However, if there are always some content in the highest priority queue, then the other packets in the rest of queues will not be sent until the highest priority queue is empty.
  • Page 40 3010E/3020E/3040E G.SHDSL.bis EFM Bridge Modem User’s Manual Ver:A2 2. WRR Configuration If the user chooses “Type 1” in “Scheduling Configuration” section, then the information in “WRR Configuration” section is required to be filled in. Users are able to assign from 1 to 15 for the value of a weight for each queue.

  • Page 41: Vlan Tag Priority

    3010E/3020E/3040E G.SHDSL.bis EFM Bridge Modem User’s Manual Ver:A2 If we choose “Type 3”, then we know our queues will apply BE, WFQ, WFQ, and SP techniques. Then, we assign which port should go to which queue. Assume the following settings… Port Queue Algorithm...
  • Page 42 3010E/3020E/3040E G.SHDSL.bis EFM Bridge Modem User’s Manual Ver:A2 VLAN Tag Priority uses the tag field information which has been inserted into an Ethernet frame. If a port has an 802.1Q-compliant device attached (such as this modem), these tagged frames can carry VLAN membership information.
  • Page 43 3010E/3020E/3040E G.SHDSL.bis EFM Bridge Modem User’s Manual Ver:A2 WRR Configuration: If you would like to apply WRR as the QoS algorithm for your EFM modem, then, please assign the weight for each queue. “Weight” means how important the queue is; therefore, 15 is the most important queue and 0 is the least important queue.

  • Page 44: Ip Dscp Priority

    3010E/3020E/3040E G.SHDSL.bis EFM Bridge Modem User’s Manual Ver:A2 Hence, we know… 1. Packets with priority 0 and priority 1 go to Queue 0. 2. Packets with priority 2 and priority 3 go to Queue 2. 3. Packets with priority 4 and priority 5 go to Queue 3. 4.
  • Page 45 3010E/3020E/3040E G.SHDSL.bis EFM Bridge Modem User’s Manual Ver:A2 1. Scheduling Configuration: Choose which combination you would like to apply: “Type 1”, “Type 2”, or “Type 3”. 2. WRR Configuration: If you choose to apply WRR technique, fill up weights to indicate how important the queue is. (Weight: 0 to 3.
  • Page 46 3010E/3020E/3040E G.SHDSL.bis EFM Bridge Modem User’s Manual Ver:A2 Example: WFQ Configuration Port Queue LAN 1 LAN 2 LAN 3 LAN 4 Since we choose “Type 3”, Queue 0 and Queue 3 do not apply WFQ algorithm. Hence, we only need to setup WFQ configurations for Queue 1 and Queue 2.

  • Page 47: Rate Limiting

    3010E/3020E/3040E G.SHDSL.bis EFM Bridge Modem User’s Manual Ver:A2 3.5.4 Rate Limiting Click Rate Limiting to configure the EFM modem. Limiting bandwidth to specific users and ports helps control network congestion, ensure high performance, create efficient networks, and prevent a small number of users from monopolizing network bandwidth. Rate limiting control can be used to intelligently manage bandwidth allocation in the networking.

  • Page 48: Status

    3010E/3020E/3040E G.SHDSL.bis EFM Bridge Modem User’s Manual Ver:A2 3.6 Status When you click STATUS You can monitor the following : SHDSL.bis EFM, MGMT and LAN. 3.6.1 SHDSL .Bis EFM SHDSL.bis status including run-time device status : SHDSL.bis mode and Line Rate and Performance information: SNR margin, attenuation and CRC error count.

  • Page 49: Mgmt

    3010E/3020E/3040E G.SHDSL.bis EFM Bridge Modem User’s Manual Ver:A2 3.6.2 MGMT MGMT status will display the MGMT interface information. You can view the general status of MGMT interface and DHCP client table. 3.6.3 LAN LAN status will prompt the setting on IP type, IP address and Subnet mask. For example, it shows the IP type of LAN interface is Fixed:...

  • Page 50: Administration

    3010E/3020E/3040E G.SHDSL.bis EFM Bridge Modem User’s Manual Ver:A2 3.7 Administration This session introduces Administration including SECURITY and SNMP (simple network management protocol). 3.7.1 Security For system security, suggest to change the default user name and password in the first setup otherwise unauthorized persons can access the EFM modem and change the parameters.
  • Page 51 3010E/3020E/3040E G.SHDSL.bis EFM Bridge Modem User’s Manual Ver:A2 modes, menu driven mode and command mode to configure the EFM modem. The default user name on and Password are “admin”. There are two UI modes, menu and command mode for telnet or console mode to setup the EFM modem. The menu is meaning menu driven interface mode and Command is meaning line command mode.
  • Page 52 3010E/3020E/3040E G.SHDSL.bis EFM Bridge Modem User’s Manual Ver:A2 Legal address pool will setup the legal IP addresses from which authorized person can configure the EFM modem. This is the more secure function for network administrator to setup the legal address of configuration. Configured 0.0.0.0 will allow all hosts on Internet or LAN to access the EFM modem.

  • Page 53: Snmp

    3010E/3020E/3040E G.SHDSL.bis EFM Bridge Modem User’s Manual Ver:A2 3.7.2 SNMP Simple Network Management Protocol (SNMP) provides for the exchange of messages between a network management client and a network management agent for remote management of network nodes. These messages contain requests to get and set variables that exist in network nodes in order to obtain statistics, set configuration parameters, and monitor network events.

  • Page 54: Community Pool

    3010E/3020E/3040E G.SHDSL.bis EFM Bridge Modem User’s Manual Ver:A2 3.7.2.1 Community Pool An SNMP community is the group that devices and management stations running SNMP belong to. It helps define where information is sent. The community name is used to identify the group. A SNMP device or agent may belong to more than one community.

  • Page 55: Trap Host Pool

    3010E/3020E/3040E G.SHDSL.bis EFM Bridge Modem User’s Manual Ver:A2 3.7.2.2 Trap Host Pool In the table of current trap host pool, you can setup the trap host. SNMP trap is an informational message sent from an SNMP agent to a manager. It is a management station (SNMP application) that receives traps.

  • Page 56: Utility

    3010E/3020E/3040E G.SHDSL.bis EFM Bridge Modem User’s Manual Ver:A2 3.8 Utility This section will describe the UTILITY of the EFM modem. The UTILITY menu including: SYSTEM INFO: system information, CONFIG TOOL: load the factory default configuration, UPGRADE: upgrade the firmware LOGOUT: logout the system RESTART: restart the EFM modem.

  • Page 57: System Info

    3010E/3020E/3040E G.SHDSL.bis EFM Bridge Modem User’s Manual Ver:A2 3.8.1 System Info For review the information, click SYSTEM INFO to display the screen as shown below. You can check the MCSV, Software Version, Chipset, Firmware Version, Host Name and System Up Time. The System Up Time item let you know the EFM modem how long time after power on.

  • Page 58: Config Tool

    3010E/3020E/3040E G.SHDSL.bis EFM Bridge Modem User’s Manual Ver:A2 3.8.2 CONFIG Tool This configuration tool has three functions: load Factory Default, Restore Configuration, and Backup Configuration. Press CONFIG TOOL, you can view the following: Choose the function and then press Finish. Load Factory Default: It will load the factory default parameters to the EFM modem.

  • Page 59: Upgrade

    3010E/3020E/3040E G.SHDSL.bis EFM Bridge Modem User’s Manual Ver:A2 3.8.3 Upgrade You can upgrade the firmware of EFM modem using the upgrade function. Press Upgrade in UTILITY menu. Type the path and file name of the firmware file you wish to upload to the EFM modem in text box or click Browse to locate it.

  • Page 60: Restart

    3010E/3020E/3040E G.SHDSL.bis EFM Bridge Modem User’s Manual Ver:A2 3.8.5 Restart For restarting the EFM modem, press Restart to reboot the EFM modem. When you press Restart, display screen is as following: It show the configuration is success. When the system have rebooted later, you can re-open the browser.

  • Page 61: Configuration Use Serial Console And Telnet With Menu Driven Interface

    3010E/3020E/3040E G.SHDSL.bis EFM Bridge Modem User’s Manual Ver:A2 4 Configuration use Serial Console and Telnet with Menu Driven Interface 4.1 Introduction 4.1.1 Login to the Console Interface The console port is a RJ-48C connector that enables a connection to a PC for monitoring and configuring the EFM modem.

  • Page 62: Telnet Login

    3010E/3020E/3040E G.SHDSL.bis EFM Bridge Modem User’s Manual Ver:A2 4.1.2 Telnet login The EFM modem also supports telnet for remote management. Make sure the correct Ethernet cable connected the MGMT port of EFM modem to your computer. The MGMT indicator on the front panel shall light if a correct cable is used. Starting your Telnet client with VT100 terminal emulation and connecting to the management IP of EFM modem, wait for the login prompt appears.
  • Page 63 3010E/3020E/3040E G.SHDSL.bis EFM Bridge Modem User’s Manual Ver:A2 Ctrl + C To quit the configuring item. Ctrl + Q For help For serial console and Telnet management, the EFM Modem implements the menu driven interface. It can show you all of available commands for you to select. You don’t need to remember the command syntax and save your time on typing the whole command line.

  • Page 64: Window Structure

    3010E/3020E/3040E G.SHDSL.bis EFM Bridge Modem User’s Manual Ver:A2 4.1.4 Window structure From top to bottom, the window is divided into four parts: Product name: SHDSL.bis EFM Bridge Menu field: Menu tree prompts on this field. Symbol “>>” indicates the cursor place. Configuring field: You will configure the parameters in this field.
  • Page 65 3010E/3020E/3040E G.SHDSL.bis EFM Bridge Modem User’s Manual Ver:A2...

  • Page 66: Menu Tree For Unauthorized User

    3010E/3020E/3040E G.SHDSL.bis EFM Bridge Modem User’s Manual Ver:A2 If you are the authorized user, you can view the display screen as the following: 4.2.2 Menu tree for unauthorized user If you are the unauthorized user, the menu tree is the following: If you are the unauthorized user, you can view the display screen as below.

  • Page 67: Enable

    3010E/3020E/3040E G.SHDSL.bis EFM Bridge Modem User’s Manual Ver:A2 4.3 Enable To setup the EFM modem, move the cursor “ >>” to enable and press enter key. While the screen appears, type the supervisor password. The default supervisor password is “root”. The password will be prompted as “ * “...
  • Page 68 3010E/3020E/3040E G.SHDSL.bis EFM Bridge Modem User’s Manual Ver:A2 Command Description: Command Description enable Modify command privilege. When you login via serial console or Telnet, the EFM modem defaults to a program execution (read-only) privileges to you. To change the configuration and write changes to nonvolatile RAM (NVRAM), you must work in enable mode.

  • Page 69: Setup

    3010E/3020E/3040E G.SHDSL.bis EFM Bridge Modem User’s Manual Ver:A2 4.4 Setup All of the setup parameters are located in the subdirectories of setup. Move the cursor “ >>” to setup and press enter. >> shdsl.bis Configure SHDSL.bis parameters Configure LAN interface profile vlan Configure virtual LAN parameters Configure Quality of Service parameters...

  • Page 70: Annex

    3010E/3020E/3040E G.SHDSL.bis EFM Bridge Modem User’s Manual Ver:A2 4.4.1.3 Annex There are two types of SHDSL.bis Annex type: Annex-AF, and Annex-BG. 4.4.1.4 TCPAM There are two TCPAM modes for SHDSL.Bis: TCPAM-16 and TCPAM-32. You also can select Auto mode. 4.4.1.5 Maximum main rate You can setup the SHDSL.bis main rate is in the multiple of 64kbps , 128kpbs or 256 Kbps, according using which model.

  • Page 71: Clear

    3010E/3020E/3040E G.SHDSL.bis EFM Bridge Modem User’s Manual Ver:A2 4.4.1.8 Clear The Clear command can clear CRC error count. SHDSL.bis: Mode □STU-C □STU-R Link Type □2-wire □4-wire □8-wire Annex Type □AF □BG TCPAM □Auto □TCPAM-16 □TCPAM-32 Max Main Rate (3~177) SNR Margin (-10~21) Line Probe □Disable □Enable...

  • Page 72: Vlan

    3010E/3020E/3040E G.SHDSL.bis EFM Bridge Modem User’s Manual Ver:A2 IP address (ENTER for default) <192.168.2.1>: Subnet mask (ENTER for default) <255.255.255.0>: ----------------------------------------------------------------------------- You can configure LAN IP address, subnet mask. The default value is 192.168.2.1 and 255.255.255.0 LAN: Link Type □Disable □Dynamic □Static IP Address...

  • Page 73: Q Vlan

    3010E/3020E/3040E G.SHDSL.bis EFM Bridge Modem User’s Manual Ver:A2 Trigger VLAN function (TAB Select) <Disable>: ----------------------------------------------------------------------------- VLAN Mode: VLAN Mode □Disable □802.1Q Tag VLAN □Port Based VLAN 4.4.3.2 802.11Q VLAN To modify the VLAN rule, move the cursor to modify and press enter. ----------------------------------------------------------------------------- Command: setup vlan modify <1~8>...

  • Page 74: Port Based Vlan

    3010E/3020E/3040E G.SHDSL.bis EFM Bridge Modem User’s Manual Ver:A2 packet form the port. The port index 1 to 4 represents LANs ports, index 5 represents DSL and index 6 represents Sniffing respectively. ----------------------------------------------------------------------------- Command: setup vlan link_mode <1~6> <Access|Trunk> Message: Please input the following information. Port index <1~6>: 1 Port link type (TAB Select) <Access>: -----------------------------------------------------------------------------...
  • Page 75 3010E/3020E/3040E G.SHDSL.bis EFM Bridge Modem User’s Manual Ver:A2 Port Based VLAN: LAN1 LAN2 LAN3 LAN4 Sniffing Use List command can show the setup table for you check: ----------------------------------------------------------------------------- Virtual LAN Parameter VLAN Mode : Port-Based VLAN Virtual LAN Table No LAN1 LAN2 LAN3 LAN4 DSL Sniffing ---- ---- ---- ---- ---- -------- -----------------------------------------------------------------------------...

  • Page 76: Qos

    3010E/3020E/3040E G.SHDSL.bis EFM Bridge Modem User’s Manual Ver:A2 4.4.4 QoS(Quality of Service) is to decide which PCs can get the priorities to pass though EFM modem once if the bandwidth is exhausted or fully saturated. Move the cursor “ >> “ to qos and press enter. >>...

  • Page 77: Queue Weight

    3010E/3020E/3040E G.SHDSL.bis EFM Bridge Modem User’s Manual Ver:A2 ----------------------------------------------------------------------------- Command: setup qos qSchdl <Type1|Type2| Type3|> Message: Please input the following information. Operation type (TAB Select) <Type1>: Type1 ----------------------------------------------------------------------------- The queuing algorithms: WRR Weight Round Robin WFQ Weighted Fair Queuing Best Effort Strictly Priority Queue Schedule: Queue Schedule...

  • Page 78: Queue Egress Rate

    3010E/3020E/3040E G.SHDSL.bis EFM Bridge Modem User’s Manual Ver:A2 4.4.4.4 Queue egress rate The queue 0 to 3 can setup their egress rate for WFQ configuration. q0GrssRt Modify queue 0 egress rate q1GrssRt Modify queue 1 egress rate q2GrssRt Modify queue 2 egress rate q3GrssRt Modify queue 3 egress rate The Egress rate N value can set 0 to 22.

  • Page 79: Ip Dscp Priority Qos

    3010E/3020E/3040E G.SHDSL.bis EFM Bridge Modem User’s Manual Ver:A2 ---------------------------------------------------------------------------- Command: setup qos vlanTagPri <0~7> <0~3> Message: Please input the following information. VLAN TAG index <0~7>: 0 Queue index (ENTER for default) <1>: 1 ----------------------------------------------------------------------------- Set up queue index(0, 1, 2 or 3) on each Priority of VLAN Tag. VLAN Tag Priority uses the tag field information which has been inserted into an Ethernet frame.

  • Page 80: List

    3010E/3020E/3040E G.SHDSL.bis EFM Bridge Modem User’s Manual Ver:A2 different priorities of forwarding. Resources can then be allocated according to the DSCP values and the configured policies. Set up queue index (0, 1, 2 or 3) on each DSCP: ----------------------------------------------------------------------------- Command: setup qos ipDscpPri <0~63> <0~3> Message: Please input the following information.

  • Page 81: Rate

    3010E/3020E/3040E G.SHDSL.bis EFM Bridge Modem User’s Manual Ver:A2 4.4.5 RATE Move the cursor “ >> “ to Rate and press enter. ----------------------------------------------------------------------------- >> port Modify port rate list Show Rate Control configuration ----------------------------------------------------------------------------- Select which port you want to modify and then set up the data rate. ----------------------------------------------------------------------------- Command: setup rate port <1~5>...

  • Page 82: Dhcp

    3010E/3020E/3040E G.SHDSL.bis EFM Bridge Modem User’s Manual Ver:A2 ---------------------------------------------------------------------- Command: setup mgmt 1 address <ip> <netmask> Message: Please input the following information. IP address (ENTER for default) <192.168.1.1>: Subnet mask (ENTER for default) <255.255.255.0>: ---------------------------------------------------------------------- MGMT interface: IP Address Subnet Mask 4.4.7 DHCP Dynamic Host Configuration Protocol (DHCP) is a communication protocol that lets network administrators to manage centrally and automate the assignment of Internet Protocol (IP) addresses in an organization's...

  • Page 83: Dhcp Fixed Host

    3010E/3020E/3040E G.SHDSL.bis EFM Bridge Modem User’s Manual Ver:A2 >> generic DHCP server generic parameters fixed DHCP server fixed host IP list list Show DHCP configuration The generic DHCP parameters can be configured via generic command. >> active Trigger DHCP server function gateway Default gateway for DHCP client netmask...

  • Page 84: Dns Proxy

    3010E/3020E/3040E G.SHDSL.bis EFM Bridge Modem User’s Manual Ver:A2 When use the fixed host entry, you must enter the MAC address and IP address as the same time. There can be set up to 10 maximum fixed host IP address. DHCP Server with Fixed Host: Mac Address IP Address You can view the DHCP configuration via list command.

  • Page 85: Default

    3010E/3020E/3040E G.SHDSL.bis EFM Bridge Modem User’s Manual Ver:A2 ---------------------------------------------------------------------- Command: setup hostname <name> Message: Please input the following information. Local hostname (ENTER for default) <SOHO>: test ---------------------------------------------------------------------- The host name can’t use more than 15 characters and don’t use space character. Host Name: Host Name 4.4.10 Default...

  • Page 86: Shdsl.bis

    3010E/3020E/3040E G.SHDSL.bis EFM Bridge Modem User’s Manual Ver:A2 4.5.1 Shdsl.bis Move cursor “ >> “ to shdsl.bis and press enter. The SHDSL.bis status includes mode, line rate, SNR margin, attenuation, and CRC error count of the local side modem, and SNR margin, attenuation and CRC error count of remote side modem. 4.5.2 Interface Move cursor “...

  • Page 87: Show

    3010E/3020E/3040E G.SHDSL.bis EFM Bridge Modem User’s Manual Ver:A2 InOctets The field shows the number of received bytes on this port InPactets The field shows the number of received packets on this port OutOctets The field shows the number of transmitted bytes on this port OutPactets The field shows the number of transmitted packets on this port InDiscards...

  • Page 88: Show Script

    3010E/3020E/3040E G.SHDSL.bis EFM Bridge Modem User’s Manual Ver:A2 4.6.2 Show script Move cursor “ >> “ to script and press enter. 4.7 Write For any changes of configuration, you must write the new configuration to flash component using write command and then reboot the EFM modem to take effect. Move cursor “...

  • Page 89: Ping

    3010E/3020E/3040E G.SHDSL.bis EFM Bridge Modem User’s Manual Ver:A2 4.9 Ping Ping command can use to diagnose basic network connectivity of EFM modem. Move move cursor to ping command and press enter. The ping command sends an echo request packet to an address, and then awaits a reply. The ping output can help you evaluate path-to-host reliability, delays over the path, and whether the host can be reached or is functioning.

  • Page 90: Administration

    3010E/3020E/3040E G.SHDSL.bis EFM Bridge Modem User’s Manual Ver:A2 4.10 Administration You can modify the user profile, telnet access, SNMP (Simple Network Management Protocol) and supervisor information (supervisor password and ID) in admin. For configuration the parameters, move the cursor “ >> “ to admin and press enter. >>...
  • Page 91 3010E/3020E/3040E G.SHDSL.bis EFM Bridge Modem User’s Manual Ver:A2 >> attrib UI mode profile User name and password Move the cursor “>>” to attrib and press enter. ----------------------------------------------------------------------------- Command: admin user modify 2 attrib <Command|Menu> Message: Please input the following information. User interface (TAB Select) <Menu>: ----------------------------------------------------------------------------- There are two UI mode, command and menu mode, to setup the EFM modem.

  • Page 92: Security

    3010E/3020E/3040E G.SHDSL.bis EFM Bridge Modem User’s Manual Ver:A2 4.10.2 Security Security command can be configured sixteen legal IP address for telnet access and telnet port number. Move the cursor “ >> “ to security and press enter. >> port Configure telnet TCP port ip_pool Legal address IP address pool list...

  • Page 93: Snmp

    3010E/3020E/3040E G.SHDSL.bis EFM Bridge Modem User’s Manual Ver:A2 4.10.3 SNMP Simple Network Management Protocol (SNMP) is the protocol not only governing network management, but also the monitoring of network devices and their functions. SNMP provides for the exchange of messages between a network management client and a network management agent for remote management of network nodes.

  • Page 94: Trap Host

    3010E/3020E/3040E G.SHDSL.bis EFM Bridge Modem User’s Manual Ver:A2 >> edit Edit community entry list Show community configuration Move the cursor to edit and press enter. ----------------------------------------------------------------------------- Command: ... 2 edit <Disable|Enable> <string> <Read_Only|Read_Write|Denied> Message: Please input the following information. Validate (TAB Select) <Enable>: Enable Community (ENTER for default) <private>: Access right (TAB Select) <Denied>: -----------------------------------------------------------------------------...
  • Page 95 3010E/3020E/3040E G.SHDSL.bis EFM Bridge Modem User’s Manual Ver:A2 Move the cursor to edit and press enter, you can setup the following: ----------------------------------------------------------------------------- Command: admin snmp trap 1 edit <Disable|1|2> <ip> <string> Message: Please input the following information. Version (TAB Select) <Disable>: Trap host IP address (ENTER for default) <192.168.0.254>: Community (ENTER for default) <private>: -----------------------------------------------------------------------------...

  • Page 96: Supervisor Password And Id

    3010E/3020E/3040E G.SHDSL.bis EFM Bridge Modem User’s Manual Ver:A2 4.10.4 Supervisor Password and ID The supervisor ID and password is the last door for security but the most important. Users who access the EFM modem via web browser have to use the ID and password to configure the EFM model and users who access the EFM modem via telnet or console mode have to use the password to configure the EFM modem.

  • Page 97: Supervisor Password

    3010E/3020E/3040E G.SHDSL.bis EFM Bridge Modem User’s Manual Ver:A2 4.10.4.1 Supervisor Password Move the cursor to passwd and press enter. ---------------------------------------------------------------------- Command: admin passwd <pass_conf> Message: Please input the following information. Input old Supervisor password: **** Input new Supervisor password: ******** Re-type Supervisor password: ******** ---------------------------------------------------------------------- The default supervisor password is root.

  • Page 98: Utility

    3010E/3020E/3040E G.SHDSL.bis EFM Bridge Modem User’s Manual Ver:A2 4.11 Utility There are three utility tools: upgrade, backup and restore which embedded in the firmware. You can update the new firmware via TFTP upgrade tools, backup the configuration via TFTP backup tool and restore the configuration via TFTP restore tool.

  • Page 99: Restore System Configuration

    3010E/3020E/3040E G.SHDSL.bis EFM Bridge Modem User’s Manual Ver:A2 4.11.3 Restore system configuration Move the cursor “>>” to restore and press enter to restore system configuration. ----------------------------------------------------------------------------- Command: utility restore <ip> <file> Message: Please input the following information. TFTP server IP address (ENTER for default) <192.168.0.2>: Upgrade filename (ENTER for default) <default.bin>: ----------------------------------------------------------------------------- Type TFTP server IP address and restore filename of system configuration.

  • Page 100: Exit

    3010E/3020E/3040E G.SHDSL.bis EFM Bridge Modem User’s Manual Ver:A2 4.12 EXIT If you want to exit the system without saving, move the cursor “ >> “ to exit and press enter. --------------------------------------------------------------------------------------------------------------------------- enable Modify command privilege setup Configure system status Show running system status show View system configuration write...

  • Page 101: Appendix - Setup Table

    3010E/3020E/3040E G.SHDSL.bis EFM Bridge Modem User’s Manual Ver:A2 5. Appendix – Setup table SHDSL.bis: Mode □STU-C □STU-R Link type □2-wire □4-wire □8-wire Annex Type □AF □BG □Auto(TCPAM-16/32) □TCPAM-16 □TCPAM-32 TCPAM □TCPAM-64 Max Main Rate (3~177) SNR Margin (-10~21) Line Probe □Disable □Enable LAN: Link Type...
  • Page 102 3010E/3020E/3040E G.SHDSL.bis EFM Bridge Modem User’s Manual Ver:A2 Data rate limit per port: Port 1 LAN1 (0 to 22) Port 2 LAN2 (0 to 22) Port 3 LAN3 (0 to 22) Port 4 LAN4 (0 to 22) Port 5 (0 to 22) Port 6 Sniffing (0 to 22)
  • Page 103 3010E/3020E/3040E G.SHDSL.bis EFM Bridge Modem User’s Manual Ver:A2 QoS Mode: QoS Mode □Disable □Port Based □VLAN Tag □IP DSCP Queue Schedule: Queue Schedule □Type 1 □Type 2 □Type 3 WRR Configuration -- Queue Weight: Queue Index Weight Value WFQ Configuration – Data rate limit Egress Queue Port LAN1...
  • Page 104 3010E/3020E/3040E G.SHDSL.bis EFM Bridge Modem User’s Manual Ver:A2 User Profile: User User name Password Attrib profile □Menu □Command □Menu □Command □Menu □Command □Menu □Command □Menu □Command Telnet TCP Port: Telnet TCP Port Legal client IP Address pool: Legal client IP Address pool Supervisor ID and Password: Supervisor ID Supervisor...
  • Page 105 3010E/3020E/3040E G.SHDSL.bis EFM Bridge Modem User’s Manual Ver:A2 SNMP Community: SNMP entry (1) Validate □Enable □Disable Community Access Right : □Read only □Read Write □Denied SNMP entry (2) Validate □Enable □Disable Community Access Right : □Read only □Read Write □Denied SNMP entry (3) Validate □Enable...

This manual is also suitable for:

G.shdsl.bis 3020eG.shdsl.bis 3040e

Table of Contents