Dhcp Fixed Host - netsys G.SHDSL.bis 3010E User Manual

>> generic DHCP server generic parameters
fixed DHCP server fixed host IP list
list Show DHCP configuration
The generic DHCP parameters can be configured via generic command.
>> active Trigger DHCP server function
gateway Default gateway for DHCP client
netmask Subnet mask for DHCP client
ip_range Dynamic assigned IP address range
lease_time Configure max lease time
name_server1 Domain name server1
name_server2 Domain name server2
name_server3 Domain name server3
Command
Active Trigger DHCP server function
Gateway Configure default gateway for DHCP client
Net mask Configure subnet mask for DHCP client
IP range Configure dynamic assigned IP address range.
Lease time Set up dynamic IP maximum lease time
Name server 1 Set up the IP address of name server #1
Name server 2 Set up the IP address of name server #2
Name server 3 Set up the IP address of name server #3
DHCP Server:
DHCP Server
DHCL Client gateway
DHCP Client Netmask
Start IP address
Address Range
Lease Time
Name Server 1 IP
Name Server 2 IP
Name Server 3 IP

4.4.7.2 DHCP fixed Host

Fixed Host IP Address list is setup via fixed command.
generic DHCP server generic parameter
>> fixed DHCP server fixed host IP list
relay DHCP relay parameter
list Show DHCP configuration
You can add and delete a fixed host entry via fixed command.
>> add Add a fixed host entry
delete Delete a fixed host entry
3010E/3020E/3040E G.SHDSL.bis EFM Bridge Modem User's Manual Ver:A2
□Disable □Enable
83
Description