Show Script; Write; Reboot - netsys G.SHDSL.bis 3010E User Manual

3010E/3020E/3040E G.SHDSL.bis EFM Bridge Modem User's Manual Ver:A2

4.6.2 Show script

Move cursor " >> " to script and press enter.

4.7 Write

For any changes of configuration, you must write the new configuration to flash component using write
command and then reboot the EFM modem to take effect.
Move cursor " >> " to write and press enter.
----------------------------------------------------------------------
Command: write <CR>
Message: Please input the following information.
Are you sure? (y/n): y
----------------------------------------------------------------------

4.8 Reboot

To reboot the EFM modem, move cursor " >> " to reboot command and press enter.
----------------------------------------------------------------------
Command: reboot <CR>
Message: Please input the following information.
Do you want to reboot? (y/n): y
----------------------------------------------------------------------
Type "y" can start reboot operation.
88