netsys G.SHDSL.bis 3010E User Manual page 91

>> attrib UI mode
profile User name and password
Move the cursor ">>" to attrib and press enter.
-----------------------------------------------------------------------------
Command: admin user modify 2 attrib <Command|Menu>
Message: Please input the following information.
User interface (TAB Select) <Menu>:
-----------------------------------------------------------------------------
There are two UI mode, command and menu mode, to setup the EFM modem.
The menu is meaning menu driven interface mode and Command is meaning line command mode. We will
not discuss command mode in this manual.
Move the cursor ">>" to profile and press enter.
-----------------------------------------------------------------------------
Command: admin user modify 2 profile <name> <pass_conf>
Message: Please input the following information.
Legal user name (ENTER for default) <test>:
Input the old Access password: ****
Input the new Access password: ****
Re-type Access password: *****
-----------------------------------------------------------------------------
Input the user name and setup the new access password. The new assess password must key in two times
for your confirmation.
Finally, you can use list command to check the listing of five profiles including on user name and their UI mode.
On next time you re-enter this system, you can use this set of username and password. You can set up
maximum to five profiles such that five sets of username and their password.
User Profile:
User profile User name
1
2
3
4
5
3010E/3020E/3040E G.SHDSL.bis EFM Bridge Modem User's Manual Ver:A2
Password
□Menu
□Menu
□Menu
□Menu
□Menu
91
Attrib
□Command
□Command
□Command
□Command
□Command