Queue Egress Rate; Port Based Priority Qos; Vlan Tag Priority Qos - netsys G.SHDSL.bis 3010E User Manual

4.4.4.4 Queue egress rate

The queue 0 to 3 can setup their egress rate for WFQ configuration.
q0GrssRt Modify queue 0 egress rate
q1GrssRt Modify queue 1 egress rate
q2GrssRt Modify queue 2 egress rate
q3GrssRt Modify queue 3 egress rate
The Egress rate N value can set 0 to 22. The N value 0 means no limits
The egress date rate is multiple of 1024kbps.
Such that, the egress date rate = N value (1 to 22) x 1024 Kbps
Egress rate (N value):
Port
0
LAN1
LAN2
LAN3
LAN4
DSL
4.4.4.5

Port Based Priority QoS

-----------------------------------------------------------------------------
Command: setup qos portPri <1~6> <0~3>
Message: Please input the following information.
Port index <1~6>: 1
Queue index (ENTER for default) <3>: 3
-----------------------------------------------------------------------------
Set up queue value (0, 1, 2 or 3) on each ports.
Port Based Priority QoS:
Port 1(LAN1)
Queue Index
4.4.4.6

VLAN Tag Priority QoS

3010E/3020E/3040E G.SHDSL.bis EFM Bridge Modem User's Manual Ver:A2
Egress Queue
1 2
2(LAN2) 3(LAN3)
78
3
4(LAN4) 5(DSL) 6(Sniffing)