Port Based Priority - netsys G.SHDSL.bis 3010E User Manual

3.5.3.1 Port Based Priority

When you click Port Based Priority, it will show the following:
Select the ports to which the rule should be applied.
There have six ports can be applied: LAN1, LAN2, LAN3, LAN4, DSL and Sniffing
For Port Based Priority, it can setup the queue type from type 0 to type 3.
The common setting tables are:
WRR configuration: Each queue type can setup the queue weight form 1 to 15.
WFQ configuration: Each ports and their queue type can set the bandwidth.
1.
Scheduling Configuration
This modem provides three combinations of four commonly used techniques, type1, type 2 and type 3.
Choose which combination you would like to apply and fill up the corresponding information.
3010E/3020E/3040E G.SHDSL.bis EFM Bridge Modem User's Manual Ver:A2
37