4.12 EXIT
If you want to exit the system without saving, move the cursor " >> " to exit and press enter.
---------------------------------------------------------------------------------------------------------------------------
enable
setup
status
show
write
reboot
ping
admin
utility
>> exit
--------------------------------------------------------------------------------------------------------------------------
-------------------------------------------------------------------------
Command: exit <CR>
Message: Please input the following information.
Do you want to disconnect? (y/n): y
-------------------------------------------------------------------------
Please press "y", you can quit this system.
The screen will display:
------------------------------------------------------------------
Connection closed...
Press SPACE key to enter console mode configuration!
------------------------------------------------------------------
You can press SPACE key to enter this system again.
3010E/3020E/3040E G.SHDSL.bis EFM Bridge Modem User's Manual Ver:A2
Modify command privilege
Configure system
Show running system status
View system configuration
Update flash configuration
Reset and boot system
Packet internet groper command
Setup management features
TFTP upgrade utility
Quit system
100